Series 657 Aquatherm® Pulling Head Submittal
Design
The Aquatherm® pulling heads are constructed with a single-eye rated to the safe pulling strength of the pipe installed. The design of the pulling heads allows them to be fully pressure rated and sealed not allowing drilling fluids and other contaminates to enter pipe. In addition, Poly-Cam offers a female threaded port for ease of pressing the line after the pull.
The Poly-Cam pulling head utilizes a multi-level mechanical barb system which is hydraulically compressed onto the Aquatherm® polypropylene-random PP-R resin, fusiolen.
For further information please contact your Poly-cam distributor or representative.
Features
- Size range from 20mm- 630mm diameter
- Pipe is available in green, blue, and lilac
- Wall thickness Standard Dimension Ratio (SDR) is available in 17.6, 11, and 7.4
- Optional female threaded port for testing (additional charge)
- Round nose design for easy of pulling
- Strong steel construction for longevity
- Pressure-sealed design
Quality Assurance
The pulling head shall be manufactured by Poly-Cam, Inc. Poly-Cam, Inc. shall provide quality assurance with regards to proper installation, compatibility, performance, and acceptance.
- Pulling head meets or exceeds the requirements of ASTM D2513, ASTM D638, F2389, and CSA B137.11 2389.
Installation
Aquatherm® pipe end: Install in compliance with the pipe manufacturer’s recommended procedures. All field welds shall be accomplished in accordance with Aquatherm® welding procedure for butt fusion
Material
The Aquatherm® pulling head is manufactured of A53B grade Carbon Steel and incorporated with the piping of Aquatherm® polypropylene-random PP-R resin, fusiolen. All certification will be submitted upon request.